0844 997 0001 Request a quote
Full catalogue

A–Z product index

Every SKU we list, grouped by brand and range and linking straight to its product page. If you know the part number, use the search box at the top of the page; otherwise jump to a brand below.

Ancillaries Batteries BS8629 Evacuation Alert System Conventional FAAST Flame Detection Gent by Honeywell Honeywell CLSS Honeywell PA/VA Intrinsically Safe Li-ion Tamer Morley-IAS Pipework Wireless Xtralis Other lines
Brand

Ancillaries

Doc Box

Door Holders

PSU

Transformer Rectifier

Brand

Batteries

Flame Retardant

Brand

BS8629 Evacuation Alert System

Evac Smart Panel

Brand

Conventional

Beam Detection

  • 6500-LRKLong range reflector kit for 70-100mView →
  • 6500-MMKMulti Mount Kit for IR reflective beam. Provides ceiling and wall mount swivel brackets. Note: Requires 6500-SMKView →
  • 6500-SMKSurface Mount Kit for IR reflective beam detector. Allows direct surface cable entryView →

Beam Detection OSID Range

Conventional Audio Visual Devices

Conventional ES Detect

Conventional Horizon Panels

  • 002-492-222HRZ-2e, 2 zone Non-Addressable fire alarm control panel. 2 detection zones, 2 sounder outputs, surface mounting, fire…View →
  • 002-492-242HRZ-4e, 4 zone Non-Addressable fire alarm control panel. 4 detection zones, 2 sounder outputs, surface mounting, fire…View →
  • 002-492-282HRZ-8e, 8 zone Non-Addressable fire alarm control panel. 8 detection zones, 2 sounder outputs, surface mounting, fire…View →
  • 020-417Active end of line monitor moduleView →
  • 020-713Fire & fault relay module for NFS2-8View →
  • 020-743Capacitor kit for detectors not compatible with capacitive EOL monitoring. Includes 8 x 10µƒ capacitors. Active EOL's…View →
  • 020-745-008Spare installation kitView →
  • 020-7478-way input / output cardView →
  • 020-7724-way sounder output module (1.5A Max)View →
  • 020-865Spare red controls keyView →

Conventional Modules & Relays

Conventional Xenex Panels

Duct Detector

  • 2351E ALow profile Non-Addressable optical smoke detector compatible with the D2E duct detector. For accessories please see…View →
  • D2EDuct detector housing complete with B401 base for Non-Addressable detectors. (Detector not supplied). Requires DSTXX…View →
  • DST1Metal sampling tube duct width up to 0.3m (Not compatible with DH400E and DH400ACDC-E)View →
  • DST1.5Metal sampling tube duct widths 0.3 to 0.6m (Not compatible with DH400E and DH400ACDC-E)View →
  • DST10Metal sampling tube duct widths 2.4 to 3.7m (Not compatible with DH400E and DH400ACDC-E)View →
  • DST3Metal sampling tube duct widths 0.6 to 1.2m (Not compatible with DH400E and DH400ACDC-E)View →
  • DST5Metal sampling tube duct widths 1.2 to 2.4m (Not compatible with DH400E and DH400ACDC-E)View →

MCP

Vision Range

Brand

FAAST

Air Purging

ASD Interfaces & Accessories

Aspirator Accessories

Aspirator Spares

FAAST FLEX

Filter

Brand

Flame Detection

Accessories

Detector

Brand

Gent by Honeywell

Compact Plus

Gent Legacy Support

Gent Legacy Support Devices

Gent Software Upgrade

Nano

S3 Devices & Accessories

S4 Audio & Visual Only

S4 Bases & Accessories

S4 Beams

S4 Detectors

S4 Duct & Accessories

S4 Interfaces & Accessories

S4 MCP's & Accessories

  • 704952Yellow Fascia for key Switch MCP (for use with S4-34807)View →
  • 704982Yellow Surface mount back box for key Switch MCP (for use with S4-34807)View →
  • S4-34800Vigilon Manual Call Point with Glass Element IP 43 (excludes back box)View →
  • S4-34805Vigilon Manual Call Point with Resettable Element (excludes back box)View →
  • S4-34805-EPIP67 Vigilon Manual Call Point with Resettable ElementView →
  • S4-34807Vigilon Key switch MCP (supplied without back box)View →
  • S4-34842Vigilon Manual Call Point with Glass Element and Protective Cover (excludes back box)View →
  • S4-34845Vigilon Manual Call Point with Resettable Element and Protective Cover (excludes back box)View →
  • S4-34890Resettable Element for Vigilon MCP (sold in packs of 10) price per packView →
  • S4-34891Replacement Glass for S4-34800 (sold in pack of 10) price per packView →
  • S4-34892Protective Cover for S4-34800 and S4- 34805 (sold in pack of 20) price per packView →
  • S4-34895Surface Back Box (red) for S4-34800 range of MCP's (Sold in packs of 10) price per packView →
  • S4-34896Anti-Tamper Enclosure for MCP (IP66)View →
  • S4-34899Test Key for S4-34800 range of MCP (sold in packs of 25) price per packView →

SAFE

Vigilon Plus

Winmag

Brand

Honeywell CLSS

Accessories

Bundle

Gateway

SAAS

  • GATEWAY SUBSCRIPTION NETWORK SYSTEMYearly Gateway Connection Fee for a single Network (Domain). Includes GSM Data Charges and Unlimited Professional…View →
  • GATEWAY SUBSCRIPTION SINGLE PANELYearly Gateway Connection Fee for a Single Panel Includes GSM Data Charges and Unlimited Professional Technician…View →
  • GATEWAY SUBSCRIPTION VESDAVesda Detector Connection to CLSS (requires a Gateway) 1 VESDA license per Detector Currently only available to order…View →
  • ST-LICENCE-14YSelf-Test 14 Year License 1 required per ST device Unlimited testing for 14 years Order via Quotation or E-commerce…View →
  • ST-LICENSE-10YSelf-Test 10 Year License 1 required per ST device Unlimited testing for 10 years Order via Quotation or E-commerce…View →
  • ST-LICENSE-1YSelf-Test 1 Year License 1 required per ST device Unlimited testing for 1 year Order via Quotation or E-commerce PortalView →
  • ST-LICENSE-3YSelf-Test 3 Year License 1 required per ST device Unlimited testing for 3 years Order via Quotation or E-commerce PortalView →
  • ST-LICENSE-5YSelf-Test 5 Year License 1 required per ST device Unlimited testing for 5 years Order via Quotation or E-commerce PortalView →
Brand

Honeywell PA/VA

D1 Voice Rack

Speakers

V1 Voice Rack

VA/PA

Brand

Intrinsically Safe

Detector

  • 803271.EXIntrinsically Safe Heat Detector (Rate of Rise) - Please use base 805590.View →
  • 803371.EXIntrinsically Safe Optical Smoke Detector - Please use base 805590.View →
  • 803374.EXIntrinsically Safe Dual Angle Optical Heat Detector - Please use base 805590.View →

MCP

Wall Sounder

  • SOUNDER-EXBanshee Excel IS28 MK6 ATEX approved sounder (No EN54-3 approval) MonitoredView →

Wall VID

  • VID-EXIS Flashdome ATEX Approved Visual indicating device (No EN54-23 Approval) MonitoredView →

Zenner Barrier

  • 764744Z-System Zener barrier for intrinsically safe detectorsView →
  • 764746Z-System Zener barrier for AV device (Drives one sounder or two strobes)View →
Brand

Li-ion Tamer

Gas Detection

Lithium Ion Off-Gas Detection

Brand

Morley-IAS

Addressable Audio Visual Devices

Addressable Beam Detection 6500 Range

  • 6500E-26Optical beam detector based on reflective technology. Supplied as a combined transmitter/receiver unit with a reflector.…View →

Addressable Detection

  • 22051E-26Low profile Optical Smoke Sensor, no Isolator - White. Requires B501AP baseView →
  • 22051EI-26Low profile Optical Smoke Sensor c/w Isolator - White. Requires B501AP baseView →
  • 22051TE-26Multi-sensor combined optical smoke sensor and thermal sensor in a single housing, no Isolator - White, Requires B501AP…View →
  • 22051TEI-26Multi-sensor combined optical smoke sensor and thermal sensor c/w Isolator in a single housing, - White, Requires B501AP…View →
  • 22051TLE-26Smoke/Thermal/IR Sensor, no Isolator - WhiteView →
  • 22051TLEI-26Smoke/Thermal/IR Sensor c/w Isolator - WhiteView →
  • 52051E-26Heat sensorView →
  • 52051EI-26Heat sensorView →
  • 52051HTE-26Heat high temperature sensor, 78 °C, no Isolator - White. Type BS. Requires B501AP baseView →
  • 52051RE-26Heat sensorView →
  • B501APAnalogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification…View →
  • B524IEFT-1Deep analogue sensor base with built in FET isolator, with SEMS screw connections and address identification labelView →
  • BPWAddressable deep base for detector and AVView →
  • BRRAddressable deep base for detector and AVView →
  • IBS-LIDPWPure White cover plate for base sounders. Pack of 10View →
  • RMK400APRecess mounting kit suitable for flush mounting bases into a false ceilingView →
  • WB-1APWet base shroud for use with standard bases to allow condensation run off and rear seal. Conduit entry only. Pure White…View →
  • WPWAddressable sealed deep base for detector and AV. Pure White BodyView →
  • WRRAddressable sealed deep base for detector and AV. RedView →

Addressable Duct

  • DNREDuct detector housing complete with B501AP base for Addressable MI-PSE-S2 or MI-PSE-S2I detectors. (Detector not…View →

Addressable Interface modules

  • 797-065Multi-Mount EnclosureView →
  • CMX-10RME10-way relay control (output) card (unboxed PCB.) contact rating 30 Vdc, 1 A. Complete with individual input disable…View →
  • CR-6EAsix way changeover relay output with built-in loop isolation. Complete with rotary address switch and plug-in terminal…View →
  • DRM-1BS7273 Door Release Module, additional failsafe to be used in conjunction with Morley-IAS output modules to provide…View →
  • IM-10EATen input monitor module to provide an interface to a normally open contact devices such as plant outputs or flow…View →
  • M200E-DINDIN rail mounting clip for M2xx series modulesView →
  • M200E-SMBSurface mounting box for M2xx series modulesView →
  • M200SMBDeep Module enclosureView →
  • M200XELoop isolation moduleView →
  • M201EASINGLE OUTPUT MODULEView →
  • M201EA-240Output control module System Sensor Protocol. 240V ac relay contact rating, no longer comes with an enclosure e.g.…View →
  • M210EASINGLE INPUT MODULEView →
  • M210EA-CZAnalogue addressable monitor module for supervision of a conventional zone equipped with capacitive EOL elementView →
  • M210EA-CZRAnalogue addressable monitor module for supervision of a conventional zone equipped with EOL resistorView →
  • M220EADUAL INPUT MODULEView →
  • M221EA2 INPUT, 1 OUT MODULEView →
  • M501MEAAddressable "mini" input moduleView →
  • MCX-55ME5-way Addressable monitor (input) & 5 way relay control (output) card (unboxed) complete with end of line resistors…View →
  • MMX-10ME10 way Addressable monitor (input) card (unboxed) complete with end of line resistors, individual input disable…View →
  • SMB500Surface Mount Module BoxView →
  • SMB6-V0Surface mount box for up to 6 M2xx modulesView →
  • SSE-DRS-1BS7273 Door Release systemView →

Addressable Manual Call Points

  • M5A-RP01FF-K013-01Addressable manual call point no Isolator. Flexible element included. Requires PS031W for surface mounting or a single…View →
  • M5A-RP01FG-K013-01Addressable manual call point no Isolator. Glass element included. Requires PS031W for surface mounting or a single gang…View →
  • M5A-RP02FF-K013-01Addressable manual call point c/w Isolator. Flexible element included. Requires PS031W for surface mounting or a single…View →
  • M5A-RP02FG-K013-01Addressable manual call point c/w Isolator. Glass element included. Requires PS031W for surface mounting or a single…View →
  • TB011Flush mounting terminal tray for KAC units (Old PN: ETT-P)View →
  • W5A-RP01SG-K013-01Addressable waterproof call point, no Isolator, IP 67 (Old PN: WCP5A-RP01SG-01)View →
  • W5A-RP02SG-K013-01Addressable waterproof call point c/w Isolator, IP 67 (Old PN: WCP5A-RP02SG-01)View →

Loop Diagnostics

  • POL-200-TSIntelligent hand-held diagnostic test unit for analogue loops. Supplied complete with internal rechargeable battery…View →

Morley DXc Panels

  • 020-773Routing Termination Unit 1 (RTU01)View →
  • 714-001-111DXc1 Single loop panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki protocols.…View →
  • 714-001-221DXc2 2 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki…View →
  • 714-001-241DXc4 4 Loop control panel (no zone LEDs) 230Vac, 2 sounder circuits. Supports Apollo, System Sensor and Hochiki…View →
  • 795-083Keyswitch kitView →
  • 795-084Spare keys for 795-083View →
  • 795-097DXc Software programming kit (SPK) supports System Sensor, Apollo and Hochiki protocolsView →
  • 795-099Kit DXc Network Card, In order to connect panels together to create a network a DXc Network card must be fitted to each…View →
  • 795-101DXc Extension Box Cover Blank For Extension BoxView →
  • 795-10240 Zone LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half…View →
  • 795-103DXc Extension cover, comes with 80 zone LED cardView →
  • 795-104DXc replacement door for DXc control panels. The spare door fits all three variants of the panel, DXc1, DXc2 & DXc4…View →
  • 795-106DXc1 Spare Power supply unit (PSU) for 1 loop panelView →
  • 795-107DXc2/4 Spare Power supply unit (PSU) 2/4 loop panelView →
  • 795-108-001DXc replacement text inserts, pack includes all text inserts/slide-in labels including both blank and numbered labels…View →
  • 795-109-001DXc 1 loop base cardView →
  • 795-110-001DXc 2 loop base cardView →
  • 795-110-002DXc 2 loop base cardView →
  • 795-111DXc 2 Loop Expansion Card for use with the DXc4 onlyView →
  • 795-112Flush bezel kit for DXc1 (small enclosure)View →
  • 795-113Flush bezel kit for DXc 2/4 (medium enclosure)View →
  • 795-114Flush bezel kit for DXc 1 with the extension backbox fitted (small enclosure)View →
  • 795-115Flush bezel kit for DXc 2/4 with the extension backbox fitted (medium enclosure)View →
  • 795-116The custom key plate cover is supplied with a painted metal plate. The metal plate can be removed and drilled to accept…View →
  • 795-118DXc key switch kit, Control panels can be fitted with an optional key switch kit fitted by removing the existing label…View →
  • 795-120Rack Mount Bracket for DXc2/4View →
  • 795-121DXc extension Box increases the enclosure size of a DXc1, DXc2, or DXc4 control panel to accommodate larger batteries…View →
  • 795-122DXc RS232 Card allows the connection of a serial device to the panel such as BMS system or our Visuleyez product rangeView →
  • 795-12480 ZONE LED Card, includes PCB, ribbon cable, zone number labels & fixings. Zone LED PCB is fitted to the lower half…View →
  • 795-132For use with DXc1-M (714-001-214) & DXc2-M (714-001-224) only. I/O card for EN54-13 compliant sounder circuits, Fire…View →
  • 797-090DXc Extension EN54-4 compliant PSU backbox increases the enclosure size of a DXc2, or DXc4 control panel to accommodate…View →

Morley Max

Morley Plus panel

Morley ZXSe Panels

Brand

Pipework

Air Purging

Air Purging/Environmental

Environmental

Exhaust

Filter

Pipework

Pipework Capillary

Pipework Fixings

Pipework Flexible

Pipework Red 25mm

Pipework White 25mm

Sampling Clip

Sampling Discrete

Sampling Label

Sampling Refrigeration

Sampling Tamperproof

Test Accessories

Test Point

Tools

Brand

Wireless

System Sensor AGILE

Wireless Conventional ES Detect

Brand

Xtralis

Aspirator Spares

Demo Kit

Filter

Pipework Capillary

Programming & Connectivity

PSU

Rack

Remote Modules

Software

Spares

VEA Filter

VEA Panel

VEA Pipework & Fittings

VEA Sampling

VEA Spares

VEA Tools

VEP

VES

VEU

VLC

VLF

VLI

XCL

Other lines

Other lines

Lines that sit outside the brand taxonomy — still stocked to order and linked here so nothing is orphaned.

  • GATEWAY SUBSCRIPTION PRO FMYearly Gateway Professional Facility Manager License Access to end user MCP testing and Panel Controls - 1 License per…View →
  • LSC-606/DC6 watt ceiling loudspeaker c/w metal rear cover with DC blocking capacitor (6.5”) BS EN 54-24View →
  • REL/T/245Wall-Mounted Addressable Wireless Sounder VAD - Red/Red. Powered by 4x CR123A 3V batteriesView →
  • RI/W/3VRemote LED (flush mounting). Requires a single gang backbox for mountingView →
  • RI/W/BBSurface Mount Base for RI/W/3V Remote LED indicatorView →

Know the part numbers?

Send the list — same-day quotes on stocked items, and straight answers on lead times when it is not on the shelf.

Request a quote 0844 997 0001